Get notified!

Automatically receive blogupdates from our FEA Experts about Abaqus and FEA

Simuleon FEA Blog

Abaqus 2020: Download & Installation

Posted by Christine Obbink-Huizer on Dec 9, 2019 5:31:46 PM

Abaqus 2020 is now available. The download and installation is similar to that of Abaqus 2019.

As with Abaqus 2019, it is straight forward as long as the downloaded files are extracted to a common file structure and that the installation is done using (full) administrator rights, especially using Windows 10.

I’ll go through the process below. It includes print screens of most windows. Those that only require confirmation are left out for brevity. 

If you want to know what's new in the Abaqus 2020 release, please go to our other blog topic. Abaqus 2020: What's new.

1) Download the software

Go to https://www.3ds.com/support/download/ and click on ‘access your download’. You will then need to log in with 3ds credentials. Click on the products of interest, in this case Simulia Abaqus, Isight, fe-safe, Tosca. You will then reach the software download page (Figure 1).

Select the release (Abaqus 2020) and level (Abaqus 2020 Golden).

For each of the components listed, click on ‘Show details’. This will then change into ‘Hide details’.

The various downloadable entities are then shown in light blue. Click on each of these to download and save them. Since this is about 15 GB of data, it may take some time.

1.abaqus 2020_downloadFigure 1: Software download page. The location where the release and level can be selected is shown in red. ‘ Show details’  is indicated in purple. The actual downloads are indicated in blue. Please note that currently one download (for the Program Directory) is now shown, because ‘Show details’ is not clicked yet.

 

2) Extract data to a common file system

All the downloaded .tar files must be extracted to a location of choice. For the Extended Products, the 4 .tar files must be extracted together into a common file system. With WinRar and 7zip this can be done by selecting the 4 .tar files at the same time, right-clicking and then selecting ‘Extract here’. The result should be a folder named ‘ AM_SIM_ABAQUS_EXTEND.ALLOS’, not 4 folders with the names of the .tar files.

 

3) Check whether extraction was successful

This is not strictly necessary, but if things go wrong later on, it helps to know that at least the files were ok. On Windows, execute the following file:

<download directory>\AM_SIM_Abaqus_Extend.AllOS\1\0data\intel_a\DSYInsMediaCheck.exe

On Linux, execute the following file:

<download directory>/AM_SIM_Abaqus_Extend.AllOS/1/0data/linux_a64/DSYInsMediaCheck

This may take a while. In the end, the results should be ‘PASSED’ (Figure 2).

1b.abaqus 2020_verify extraction

Figure 2: Result of DSYInsMediaCheck.exe, indicating all files are properly extracted

 

(3b) If necessary: install DSLS)

Abaqus can be used either of two license systems. FlexNet is used most often, but DSLS is possible as well. In the rare cases that DSLS is to be used and the license server needs to be installed, then this must be done before the rest of the software is installed. More information on this can be found in the documentation of the DSLS, which is here: <download directory>\AM_SIM_Abaqus_Extend.AllOS\1\DS_License_Server\AllOS\1\DSLS.pdf. Do not install the DSLS license server if it is not needed.

 

4) Run the suite installer as administrator

Especially for Windows 10, it is important to have and use administrator rights when installing Abaqus and the extended products. It is best to install from the administrator account. An account with administrator rights may also work, but with Abaqus 2019 and Windows 10, we have often seen that it was not possible to run Abaqus due to issues related to administrator rights.

Right click on the suite installer (<download directory>\AM_SIM_Abaqus_Extend.AllOS\1\setup.exe) and select ‘run as administrator’ (if possible). The SIMULIA 2020 installation program will then start. Click ‘Next’.

Select the medias to install and click ‘Next’ (Figure 3). To use Abaqus, at least the SIMULIA Established Products and the SIMULIA Established Products CAAAPI should be installed. Select Isight if you want to install Isight as well. Select the FLEXNet License Server if you are using the FLEXNet licensing system, and the system you are performing the installation on should function as license server. For the documentation, we typically use the online version (available at help.3ds.com). In this case it is not necessary to install one of the first three components. If the documentation should be available offline as well, then install the Extended Product Documentation. Using EXALEAD improves the search functionality. This requires an additional license that is available free of charge. It is intended to run on servers, and may not function properly on e.g. Windows 10. The installation of this component is not shown here.

1.abaqus 2020_select components 

 Figure 3: Select the components to be installed.

 

 Check whether the correct components are selected and click ‘Install’.

 

4a Documentation

If the documentation is selected, the installation folder must be given. Usually the default is ok. You must then select the components for which the documentation should be installed (Figure 4). In this case all documentation components are installed for the sake of completion, though this is not necessary if you already know that you will neve use a specific component.

3.abaqus 2020_select components documentation

 Figure 4: Select the components for which the documentation components to install.

 

We are then asked whether to search using EXALEAD (Figure 5). This is ticked by default, and should be unticked if EXALEAD is not used.

4.abaqus 2020_exalead

Figure 5: Untick the box if EXALEAD is not used.

Click ‘Next’, check the summary provided and click ‘Install’.

 The documentation will now be installed. When this is finished, the installation is confirmed and we can continue by selecting ‘Close’.

 

4b License server

If the license server is to be installed, we are asked for the installation directory. Usually the default is fine. We then need to choose whether to only install the license server, or also start it. The default is to start it. Check the box for files only – do not start the license server program if the license server should not be started. The location of the license file is then requested (Figure 5).

5_abaqus 2020_license location

Figure 5: Enter path to license file

 

If Abaqus is already used, it is typically the newest .lic file in C:\SIMULIA\License. If this is the first Abaqus installation, this is a file that is received by e-mail.

Check the installation details and select ‘Install’ to start the installation of the FLEXnet license server. When this is finished, the installation is confirmed, and we can continue by selecting ‘Close’.

 

4c Established products

The installation of the established products (Abaqus, Tosca and fe-safe) is next. Select the installation directory and click ‘next’, typically the default is fine. The components to be installed are then selected (Figure 6).

6_abaqus 2020_select components

Figure 6: Select the established products to install.

 

Note that now Abaqus, fe-safe and Tosca can be selected from the same window, while previously each was installed individually and required a separate installation folder to be provided. The space required is given. Typically, all Abaqus related components are to be installed. If Tosca is to be used with Abaqus (or another structural solver), install Tosca Structure. If it should be used with CFD software (as well) install Tosca Fluid (as well). If you want to use fe-safe, typically you will want to install most fe-safe related components, except the tutorial models for programs that you do not use and the interface to Abaqus for ODB versions that you do not use. Click ‘Next’  to continue.

Select the License Server Configuration and click ‘Next’. Usually, the default SIMULIA FLEXnet is used.

You are then asked for the License server (Figure 7). If the license server is on the same system as the one on which Abaqus is currently installed, then the default ‘localhost’ can remain unchanged. If the license server is on a different machine, fill in the name or IP address of this machine. To include a port number, use portnumber@machine. Click ‘Next’.

7_abaqus 2020_license server location

Figure 7: Specifying the SIMULIA FLEXnet License Server

 

The system will now try to locate the license server. If this fails, an error message will be given. While it is possible to circumvent this and continue the analysis anyway, we do not recommend this. If the license server cannot be found, this is often due to a firewall blocking the connection. This is easier to troubleshoot during the installation than afterwards. Therefore, we recommend not continuing the installation, but solving the connectivity issue first.

If the connectivity to the license server is ok, the next step is to select the default Working directory (Figure 8). This is the default location of abaqus job files and of the abaqus.rpy file. It also serves as scratch directory for Tosca Fluid. The directory must exist, and the user must have write permissions to this directory in order to run the software. The default is c:\temp. Click ‘Next’ to continue.

8_Abaqus 2020_working directory

Figure 8: Selecting the default working directory

 

The CAE commands directory path can then be chosen (Figure 9). This is the location where the Abaqus launch commands will be stored. Usually the default of C:\SIMULIA\Commands is fine. 9_Abaqus 2020_CAE commands

Figure 9: Selecting the Abaqus commands directory

 

An Abaqus/CAE external plugins directory path can be selected (Figure 10). If some plugins and/or material libraries are to be used by multiple users in the same organization, then these can be stored in an external plugins directory that is accessible to all these users. This directory should then be selected. If such a structure is not present, the default is fine. Click ‘Next’.

10_Abaqus 2020_external plugins directory

Figure 10: Selecting an Abaqus/CAE external plugins directory

 

The Tosca Solver Interface(s) are then selected (Figure 11)

11_Abaqus 2020_Tosca interface

Figure 11: Tosca Solver Interfaces

 

Toggle on those that you intend to use, and select ‘Next’.

Check whether the information provided is correct and click ‘install’ to start the installation. Click ‘ok’ if necessary. If everything succeeds, you will get a message that the verification finished. Click ‘Continue’, and ‘Close’.

 

4d CAA API

The next step is to install CAA API. If the defaults are used, then the CODE installation directory will be known and ‘Next’ can be selected. Select the CAA API components to install (typically for all the components installed before) and click ‘Next’. Verify the information and click ‘Install’, and after installation is complete click ‘Close’.

 

4e Isight

Finally, Isight is installed. Select the installation directory (usually the default is fine) and click ‘Next’. Choose the Isight components to install (Figure 12) and click ‘Next’. The SIMULIA Execution Engine is used to distribute the execution of simulations between available resources. It is not necessary when running Isight on a single system.

12_Abaqus 2020_Isight components

Figure 12: Selecting Isight and SEE components to install.

 

For the SIMULIA Execution Engine, a profile can be selected. If you do not intend to use this, it can be skipped (Figure 13).

13new_SEEclient

Figure 13: Install Isight without SEE client Connection Profile

 

The documentation can be configured in different ways. In this case, the documentation is installed and we choose to enter a file path for locally installed documentation (Figure 14).

14_Isight documentation

Figure 14: Choose Isight documentation configuration

 

Since the documentation was installed at the default location, we can leave the documentation path as is and click ‘Next’ (Figure 15).

15_Isight documentation_2

Figure 15: Specifying the Isight documentation path

 

Review the information and click ‘install’. Select ‘ok’ if needed and ‘close’ when the install is finished. The complete installation is then finished. You will see an overview of all the different components installed and can click ‘close’.

Abaqus, fe-safe and Tosca 2020 are now available under ‘Dassault Systemes SIMULIA Established Products 2020’. Isight is available under Dassault Systems SIMULIA Isight 2020.

Need assistance for your FEA challenge? Request consulting

Topics: Abaqus 2020, download, installation

About our FEA Blog:

Simuleon blog topics related to Finite Element Analysis like; Structural Analysis and CFD analysis performed with SIMULIA Abaqus FEA, XFlow CFD, Isight Simulation Automation, Tosca Topology Optimization and Fe-Safe accurate Fatigue.

Subscribe to our Blog.

Search All Blogs

      Recent Posts

      Most Popular Posts

      Read All Blogs

      View All