Over 5 weeks in a 2 hour session each week, from the 12th February till 12th of March, Simuleon will hold an Online Training with live broadcasting. The training is called "Abaqus for Composites".
Join our Online Training: Abaqus for Composites (Feb-2021)
Topics: software, Abaqus, composite analysis, composite, Events & Announcements, adhesive, Online Training, XFEM
Join our webinar: Simulation of adhesives and adhesion in Abaqus
October’s webinar is entitled ‘Simulation of adhesives and adhesion in Abaqus’. It will be held on the 30st of October.
Adhesives have become a common joining method in industry but present particular challenges to the simulation engineer. The webinar will give an overview of some common methods for predicting stress states, deformation and failure on adhesively bonded joints.
Topics: Abaqus, Events & Announcements, adhesive, adhesion
Join our Online Training: Abaqus for Composites
Over 5 weeks in a 2 hour session each week, from the 8th of May till 5th of June, Simuleon will hold an Online Training with live broadcasting. The training is called "Abaqus for Composites".
Topics: software, Abaqus, composite analysis, composite, Events & Announcements, adhesive, Online Training, XFEM
Next Friday, May 27th, the webinar ‘Adhesive Joining’ will be hosted at 11.30 a.m. With the development of modern, high performance adhesives, the technology is increasingly being used to form structural connections in highly stressed applications. Use of adhesives now spans a wide range of engineering sectors including motorsport, construction, aerospace and rail. However, the behaviour of adhesives in a bonded joint is a complex subject and requires specialist analysis to achieve optimised results.
In this webinar we will be looking at methods for accurately simulating the performance of adhesively bonded structures using the methods available in Abaqus.
Topics: software, Events & Announcements, adhesive