English
Over 5 weeks in a 2 hour session each week, from the 8th of May till 5th of June, Simuleon will hold an Online Training with live broadcasting. The training is called "Abaqus for Composites".
0 Comments Click here to read/write comments
Topics: software, Abaqus, composite analysis, composite, Events & Announcements, adhesive, Online Training, XFEM
In this blog, we will be providing information on the modelling of laminated composites with Abaqus. Modelling will be done using the composite layup tool, and material orientations will also be assigned.
Those modelling features will be demonstrated with a relevant example case of a composite flanged tube under loading. The tube will be subjected to thermal and radial pressure loading.
0 Comments Click here to read/write comments
Topics: Abaqus/CAE, composite analysis, ply, flange, tube, laminated, fibre, matrix, carbon, epoxy
This FREE event on the 28th of February at our office in Den Bosch, NETHERLANDS, is meant for engineers who have some experience of Composites or FEA and would like to look at what is possible with simulation of composites performed by Abaqus FEA. The workshop is also suitable for engineers where ultimate structural performance is a critical product characteristic in their field. For example in areas of composite engineering such as marine, offshore, renewable energy, automotive, sports equipment and medical sciences.Structural Analysis - Composite behaviour.
What topics are discussed?
0 Comments Click here to read/write comments
Topics: Abaqus, composite analysis, composite, free workshop
