Get notified!

Automatically receive blogupdates from our FEA Experts about Abaqus and FEA

Simuleon FEA Blog

Abaqus FSI Drop Test - 100 liter HDPE Fuel tank

Posted by Dolf Broekaart on Oct 21, 2016 4:28:23 PM

This blog shows how we performed a drop test for a Polyethylene 100 liter Fueltank containing fluid with SIMULIA Abaqus FEA Software. The goal of this analysis is to predict the possible material behaviour and failure that will lead to leakage.

This example involves a fluid-filled plastic tank falling from a height of roughly 15 meters onto a flat, rigid floor. The tank as shown in the pictures below is made of high-density polyethylene with a wall thickness of 5 mm everywhere. The tank is filled almost completely (about 90%) with water. A realistic simulation for the tank must account for both the exterior forces on the tank from the floor impact, as well as the interior forces of the water pushing against the walls of the tank. Resulting stresses and strains in the tank will be used to determine its structural feasibility. 

Read More

Topics: Abaqus, CEL, Drop Test, FSI

About our FEA Blog:

Simuleon blog topics related to Finite Element Analysis like; Structural Analysis and CFD analysis performed with SIMULIA Abaqus FEA, XFlow CFD, Isight Simulation Automation, Tosca Topology Optimization and Fe-Safe accurate Fatigue.

Subscribe to our Blog.

Search All Blogs

      Recent Posts

      Most Popular Posts

      Read All Blogs

      View All