In this blog post, we will be discussing about metal tube hydroforming with Abaqus. We will be using forming limit diagrams to create the material's strain envelope, for avoiding necking (rupture), a possible failure mode, in this type of metal forming process. This will be demonstrated in a hydroforming process simulation of a metal bellows joint.
Metal tube hydroforming process and forming limit diagrams in Abaqus
Posted by
Nikolaos Mavrodontis on Aug 5, 2020 10:30:00 AM
0 Comments Click here to read/write comments
Topics: Abaqus, Tips, Tricks & Approaches, hydroforming, Forming Limit Diagram, FLD