Sometimes you have a mesh in Abaqus, and you don’t have the corresponding geometry. Abaqus offers tools to create geometry based on a mesh. Here I will discuss two options: using the mesh-to-geometry plug-in and using the built-in tools. I’ll explain the difference and when to choose which option.
Two Ways to Get Geometry From an Orphan Mesh in Abaqus
Topics: create mesh from geometry, meshing
Geometry import and meshing is one of the key areas where we as FE analysts can spend a lot of time and effort. For meshing in particular, using hexahedral elements to mesh complex parts can be difficult. In this blog we explore one way to obtain a hexahedral mesh for two relatively difficult parts.
Topics: create mesh from geometry, meshing
Join our online webinar: Meshing native geometry in Abaqus/CAE
This month’s webinar will cover meshing of native geometry in Abaqus. A short section on processing geometry to improve mesh quality will be followed by a discussion of the various meshing techniques available to the user. The webinar will conclude with a brief introduction to the tools available for working with non-native meshes in Abaqus.
Topics: software, Abaqus, meshing, Abaqus/CAE