Get notified!

Automatically receive blog updates from our FEA Experts about Abaqus and FEA

Simuleon FEA Blog

Use skins and stringers for shell or beam reinforcements in Abaqus

Posted by Christine Obbink-Huizer on Sep 19, 2017 9:02:47 AM

A bulk material may be reinforced with a stiffer outer layer or a beam structure connected to it. In Abaqus, such layers or beams can be included by creating shells or beams that are tied to the bulk material. It is more efficient, however, to use a skin to model a shell layer, or a stringer to model a beam. With these options additional shell (skin) or beam (stringer) elements are created that share nodes with the underlying mesh. They don’t need to be meshed separately and no tie is required. Properties can be defined similar to regular shell or beam elements.

In this blog, I will show how to define skins and stringers and assign properties to them.

Read More

Topics: Abaqus, skins, stringers, shell layer

About our FEA Blog:

Simuleon blog topics related to Finite Element Analysis like; Structural Analysis and CFD analysis performed with SIMULIA Abaqus FEA, XFlow CFD, Isight Simulation Automation, Tosca Topology Optimization and Fe-Safe accurate Fatigue.

Subscribe to our Blog.

Search All Blogs

  • There are no suggestions because the search field is empty.

Posts by Tag

See all

Recent Posts

Most Popular Posts

Read All Blogs

View All