Get notified!

Automatically receive blog updates from our FEA Experts about Abaqus and FEA

Simuleon FEA Blog

From Blow Molding process to Structural Performance with Abaqus FEA

Posted by Christine Obbink-Huizer on Jul 14, 2016 3:48:25 PM

In this blog we will focus on the capabilities of Simulia Abaqus to assist in simulating the Blow-Stretch Molding process and use those outcomes like varying wallthicknesses, axial and circumferential Strains, and local obtained material specifications to use that as a basis for a Top Load Analysis on the same plastic bottle.

Read More

Topics: topload, plastic bottle, Abaqus, simulia, Blow Molding Process

Simulating Top load, Squeeze load and Crush load for plastic bottle

Posted by Dolf Broekaart on Mar 15, 2016 1:06:23 PM
This article focuses on how to simulate and predict the behaviour of plastic bottles under top load, squeeze load and crush load with SIMULIA Abaqus. We will explain the approach, the challenges and their solutions.

The introduction

The geometry describes a PET bottle which can contain 0.5 l of drinkable liquid. Performing a top load analysis is important to determine the vertical stiffness of the bottle. This top load is also important to determine the vertical stack ability.

Read More

Topics: Non-Linear, topload, squeeze load, crush load, plastic bottle

About our FEA Blog:

Simuleon blog topics related to Finite Element Analysis like; Structural Analysis and CFD analysis performed with SIMULIA Abaqus FEA, XFlow CFD, Isight Simulation Automation, Tosca Topology Optimization and Fe-Safe accurate Fatigue.

Subscribe to our Blog.

Search All Blogs

  • There are no suggestions because the search field is empty.

Posts by Tag

See all

Recent Posts

Most Popular Posts

Read All Blogs

View All