## Simuleon FEA Blog

The “Introduction to Optimization for Abaqus Workshop” is a free event for anyone who has some experience with Abaqus and would like to explore the possibilities of optimization. Both non-parametric topology optimization using Tosca and parametric optimization using Isight are discussed, focusing on the optimization of problems using the finite element code Abaqus.

Topics: Abaqus, isight, tosca

Previously we posted a blog about optimization of a clap skate using Tosca. I wanted to revisit the topic, by comparing the parametric optimization in Isight and non-parametric optimization in Tosca.

In that blog clap skates were used, but since the weather has started to warm up, I thought in-line skates would be a better case study, particularly the frame (Figure 1). Both software are powerful and complex, so I will try to keep things simple and showcase the basics. More detailed information for the optimization in Isight can be found here and in Tosca here.

In the past, the reliability of some products were assured by keeping the mass of those relatively high. When computers started being a tool available for all, engineers began using them to calculate what is the likelyhood of failure. With this approach, weight of products was reduced and theirs reliability increased (or at least kept at the same level).

The “Introduction to Optimization for Abaqus Workshop” is a free event for anyone who has some experience with Abaqus and would like to explore the possibilities of optimization. Both non-parametric topology optimization using Tosca and parametric optimization using Isight are discussed, focusing on the optimization of problems using the finite element code Abaqus.

Topics: Abaqus, isight, tosca

Tosca is used for non-parametric optimization. It has several different flavors; it can be used to determine:

Topics: Topology Optimization, tosca, sizing

The “Introduction to Optimization for Abaqus Workshop” is a free event for anyone who has some experience with Abaqus and would like to explore the possibilities of optimization. Both non-parametric topology optimization using Tosca and parametric optimization using Isight are discussed, focusing on the optimization of problems using the finite element code Abaqus.

Topics: Abaqus, isight, tosca

Simuleon blog topics related to Finite Element Analysis like; Structural Analysis and CFD analysis performed with SIMULIA Abaqus FEA, XFlow CFD, Isight Simulation Automation, Tosca Topology Optimization and Fe-Safe accurate Fatigue.